


=======================================================================================
EC Firmware Version : [10.44.00]test version
PD Firmware Version : 2.5.26
Build Date: 2021/9/8

Change:
    Turn off the PD power about 1~2 second and then turn on when S5 to S0
=======================================================================================
EC Firmware Version : [09.44.00]test version ,log
PD Firmware Version : 2.5.26
Build Date: 2021/8/12

From:
            PS_ON_N_LO();                   //
            DelayXms(50);                   //
            S5toS0PowerRising check         //org*
            EC_ALW_EN_ON();                 //
            no usb power                    //change*
Change to:
            PS_ON_N_LO();
            DelayXms(50);
            DelayXms(100);                  //add *
            remove S5toS0PowerRising check  //change *
            EC_ALW_EN_ON();
            usb power normal                //org
            disable Turn_On_WLAN_PWR        //change *

=======================================================================================
EC Firmware Version : [08.44.00]test version ,log
PD Firmware Version : 2.5.26
Build Date: 2021/8/12

From:
            PS_ON_N_LO();
            DelayXms(50);
            DelayXms(200);                  //*
            remove S5toS0PowerRising check  //*
            EC_ALW_EN_ON();
Change to:
            PS_ON_N_LO();                   //org
            DelayXms(50);                   //org
            S5toS0PowerRising check         //org
            EC_ALW_EN_ON();                 //org

            no usb power
=======================================================================================
EC Firmware Version : [07.44.00]test version ,log
PD Firmware Version : 2.5.26
Build Date: 2021/8/12

From:
            PS_ON_N_LO();                   //org
            DelayXms(50);                   //org
            DelayXms(400);                  //add *
            S5toS0PowerRising check         //org
            EC_ALW_EN_ON();                 //org
Change:
            PS_ON_N_LO();
            DelayXms(50);
            DelayXms(200);                  //Change *
            remove S5toS0PowerRising check  //Change *
            EC_ALW_EN_ON();
=======================================================================================
EC Firmware Version : [06.44.00]test version ,log
PD Firmware Version : 2.5.26
Build Date: 2021/8/11

Change:
            add:DelayXms(400);
            then
                EC_ALW_EN_ON();
=======================================================================================
EC Firmware Version : [05.44.00]test version ,log
PD Firmware Version : 2.5.26
Build Date: 2021/8/11

Change:
    each usb power-on time interval is changed form 5ms to 10ms
    enable EmergencyPowerLoss
=======================================================================================
EC Firmware Version : [04.44.00]test version ,log
PD Firmware Version : 2.5.26
Build Date: 2021/8/11

Change:
    Disable EmergencyPowerLoss
=======================================================================================
EC Firmware Version : [03.44.00]test version ,log
EC Firmware Version : [02.44.00]test version
PD Firmware Version : 2.5.26
Build Date: 2021/8/10

Change:
    remove EC_ALW_EN_OFF in Check_EmergencyPowerLoss_Process
=======================================================================================
EC Firmware Version : [01.44.00]test version
PD Firmware Version : 2.5.26
Build Date: 2021/8/10

Change:
    remove auto power on function for test
    add EC_ALW_EN_OFF in Check_EmergencyPowerLoss_Process
=======================================================================================
EC Firmware Version : [24.44.00]
PD Firmware Version : 2.5.26
Build Date: 2021/7/19
CheckSum:0x21D921A

EC Firmware Version : [87.43.00]
PD Firmware Version : 2.5.26
Build Date: 2021/7/13

From:
    power on all usb after s5/g3 when keep usb power on mode
Change to:
    each usb to power on at intervals after s5/g3 when keep usb power on mode
=======================================================================================
EC Firmware Version : [24.43.00]
PD Firmware Version : 2.5.26
Build Date: 2021/5/27
CheckSum:0x21E174C

EC Firmware Version : [01.42.00]test version
PD Firmware Version : 2.5.26
Build Date: 2021/5/20

Change:
    store USB S5 power setting in EC ROM and apply the setting after G3

=======================================================================================
EC Firmware Version : [24.42.00]
PD Firmware Version : 2.5.26
Build Date: 2021/5/10
CheckSum:0x21E2452

EC Firmware Version : [86.41.00]
PD Firmware Version : 2.5.26
Build Date: 2021/4/28

From:
    set EC_ALW_EN ON in PSU_MODE when G3 boot
Change to:
    set EC_ALW_EN OFF in PSU_MODE when G3 boot
=======================================================================================
EC Firmware Version : [24.41.00]
PD Firmware Version : 2.5.26
Build Date: 2021/2/22
CheckSum:0x21E1B30

1. change to only single temperature sensor for fan duty
2. revert to 24.39.00:change power sequence of 24.40.00 
=======================================================================================
EC Firmware Version : [24.40.00]
PD Firmware Version : 2.5.26
Build Date: 2020/11/23
CheckSum:0x21E1E10

1. change power sequence
From:
GPF3(H) --> GPC7(L) --> delay 50mS --> [GPG1(H) --> GPI1/ADC1(>1.3V)] --> delay 35mS --> GPE1(H) --> GPE2(H)
Change to:
GPF3(H) --> GPC7(L) --> delay 50mS  --> [GPI1/ADC1(>1.3V) --> GPG1(H)] --> delay 35mS --> GPE1(H) --> GPE2(H)

2. fix WMI led issue
=======================================================================================
EC Firmware Version : [83.39.00],log
PD Firmware Version : 2.5.26
Build Date: 2020/11/20
From:
GPF3(H) --> GPC7(L) --> delay 50mS --> [GPG1(H) --> GPI1/ADC1(>1.3V)] --> delay 35mS --> GPE1(H) --> GPE2(H)

Change to:
GPF3(H) --> GPC7(L) --> delay 50mS  --> [GPI1/ADC1(>1.3V) --> GPG1(H)] --> delay 35mS --> GPE1(H) --> GPE2(H)
=======================================================================================
EC Firmware Version : [24.39.00]
PD Firmware Version : 2.5.26
Build Date: 2020/11/17
CheckSum:0x21E7496

Changes:
1.check whether QN baseboard via smbus of PSU
2.read eeprom to push to h2ram(0xfe410b06~0xfe410b85),size:128 byte
=======================================================================================
EC Firmware Version : [82.38.00],log
PD Firmware Version : 2.5.26
Build Date: 2020/11/16

Changes:
1.check whether QN baseboard via smbus of PSU
2.read eeprom to push to h2ram(0xfe410b06~0xfe410b85),size:128 byte
=======================================================================================
EC Firmware Version : [24.38.00]
PD Firmware Version : 2.5.26
Build Date: 2020/9/4
CheckSum:0x21EB233

Changes:
delay 500ms to read eeprom after push power button for pcie config
base on:
24.37.00
=======================================================================================
EC Firmware Version : [81.37.00]
PD Firmware Version : 2.5.26
Build Date: 2020/9/2

Changes:
base on 24.37 to change version only for test auto power on
=======================================================================================
EC Firmware Version : [80.33.00],log
PD Firmware Version : 2.5.25
Build Date: 2020/8/26

Changes:
delay 500ms to read eeprom after push power button for pcie config
=======================================================================================
EC Firmware Version : [79.33.00],log
PD Firmware Version : 2.5.25
Build Date: 2020/8/20

Changes:
set a flag when fxn received bios command for pcie config
note:flag define at h2ram(0xfe410a45)
=======================================================================================
EC Firmware Version : [24.37.00]
PD Firmware Version : 2.5.26
Build Date: 2020/8/12
CheckSum:0x21D2461

Changes:
reduce PCH_PWRBTN(GPF5) pulse when AC on
=======================================================================================
EC Firmware Version : [78.33.00],log
PD Firmware Version : 2.5.25
Build Date: 2020/8/10

Changes:
add log for PCH_PWRBTN_LO(GPDRF5) check
=======================================================================================
EC Firmware Version : [77.33.00],log
PD Firmware Version : 2.5.25
Build Date: 2020/7/31

Changes:
check eeprom then check whether cfg6,5 is 1,0
=======================================================================================
EC Firmware Version : [76.33.00],log
PD Firmware Version : 2.5.25
Build Date: 2020/7/31

Changes:
add eeprom for cfg6,5 init setting
=======================================================================================
EC Firmware Version : [75.33.00],log
PD Firmware Version : 2.5.25
Build Date: 2020/7/13

Changes:
1.base on 24.33 to add more log for espi waitting
=======================================================================================
EC Firmware Version : [74.33.00],log
PD Firmware Version : 2.5.25
Build Date: 2020/7/13

Changes:
1.base on 24.33 ,delay 15ms change to delay 4sec before RSMRST_Reset set Hi when G3 boot
=======================================================================================
EC Firmware Version : [73.33.00],log
PD Firmware Version : 2.5.25
Build Date: 2020/7/8

Changes:
1.base on 24.33 to add log for espi waitting
=======================================================================================
EC Firmware Version : [72.33.00],log
PD Firmware Version : 2.5.25
Build Date: 2020/7/7

Changes:
1.delay 5sec to RSMRST_Reset &
=======================================================================================
EC Firmware Version : [71.33.00],log
PD Firmware Version : 2.5.25
Build Date: 2020/7/7

Changes:
1.delay 5sec to RSMRST_Reset &
2.ec disable sleep &
=======================================================================================
EC Firmware Version : [70.33.00],log
PD Firmware Version : 2.5.25
Build Date: 2020/7/7

Changes:
1.delay 5sec to RSMRST_Reset &
2.ec disable sleep &
3.remark RSMRST_Reset lo in EmergencyPowerLoss
4.remark RSMRST_Reset lo in Deep_Sleep_Mode
=======================================================================================
EC Firmware Version : [67.33.00],log
PD Firmware Version : 2.5.25
Build Date: 2020/6/19 11:15
CheckSum  : 0x222C025
Fixed bugs:
    NOT PCH_RSMRST_LO & NOT F_VW_CHN_ENABLE then delay 5sec to RSMRST_Reset
    
Other Changes: 
    None.
    
Known issues:  
    None.
    
Note:  
    Must be used with after the BIOS QN0020/QX0020, or system will be dead loop reset!!!!!
    After PD FW version 2.5.23 can PASS all UCSI WHQL test.

=======================================================================================
EC Firmware Version : [66.33.00]
PD Firmware Version : 2.5.25
Build Date: 2020/6/19 11:15
CheckSum  : 0x222C025
Fixed bugs:
    re-initial ina223 & ina219 when S3 to S0

Other Changes: 
    None.
    
Known issues:  
    None.
    
Note:  
    Must be used with after the BIOS QN0020/QX0020, or system will be dead loop reset!!!!!
    After PD FW version 2.5.23 can PASS all UCSI WHQL test.
=======================================================================================
EC Firmware Version : [24.35.00]
PD Firmware Version : 2.8.00
Build Date: 2019/12/23	14:56	
CheckSum  : 
Other Changes:
    Add single and dual color LED brightness test mailbox command(for WMI interface).

=======================================================================================

EC Firmware Version : [24.34.00]
PD Firmware Version : 2.5.26
Build Date: 2019/12/04 16:32
CheckSum  : 0x21FAEB7
Fixed bugs:
    None.

Other Changes: 
    Store indicator and CEC setting into EC NVRAM.
    Add read indicator settings mailbox command.
    
Known issues:  
    None.
    
Note:  
    Must be used with after the BIOS QN0020/QX0020, or system will be dead loop reset!!!!!
    After PD FW version 2.5.23 can PASS all UCSI WHQL test.

=======================================================================================

EC Firmware Version : [24.33.00]
PD Firmware Version : 2.5.25
Build Date: 2019/11/06 18:08
CheckSum  : 0x222BFD1
Fixed bugs:
    Fix ME test WiFi device lose issue.

Other Changes: 
    Optimize FAN hysteresis in speeding down algorithm.
    
Known issues:  
    None.
    
Note:  
    Must be used with after the BIOS QN0020/QX0020, or system will be dead loop reset!!!!!
    After PD FW version 2.5.23 can PASS all UCSI WHQL test.

=======================================================================================

EC Firmware Version : [24.32.00]
PD Firmware Version : 2.5.25
Build Date: 2019/10/30 11:12
CheckSum  : 0x222C1F3
Fixed bugs:
    Fix dual color LED behavior is same with single color LED when launch Power button Menu.

Other Changes: 
    None.
    
Known issues:  
    None.
    
Note:  
    Must be used with after the BIOS QN0020/QX0020, or system will be dead loop reset!!!!!
    After PD FW version 2.5.23 can PASS all UCSI WHQL test.

=======================================================================================

EC Firmware Version : [24.31.00]
PD Firmware Version : 2.5.23
Build Date: 2019/10/23 16:40
CheckSum  : 0x22284D7
Fixed bugs:
    None.

Other Changes: 
    Optimize HDMI CEC functions.
    Support new fan table(QN fan table_191022).
    
Known issues:  
    None.
    
Note:  
    Must be used with after the BIOS QN0020/QX0020, or system will be dead loop reset!!!!!
    The PD FW version 2.5.23 can PASS all UCSI WHQL test.

=======================================================================================

EC Firmware Version : [24.30.00]
PD Firmware Version : 2.5.20
Build Date: 2019/10/16 17:37
CheckSum  : 0x222A28C
Fixed bugs:
    Fix HDMI CEC function abnormal issue.

Other Changes: 
    Add Front Panel Power LED Blink function.
    Modify all FANs minimum duty to 32%.
    Add FAN hysteresis in speeding down function.
    
Known issues:  
    None.
    
Note:  
    Must be used with after the BIOS QN0020/QX0020, or system will be dead loop reset!!!!!

=======================================================================================

EC Firmware Version : [24.29.00]
PD Firmware Version : 2.4
Build Date: 2019/09/19 11:21
CheckSum  : 0x224004D
Fixed bugs:
    None.

Other Changes: 
    Support Dual LED Indicated function.
    Correct the Voltage_Sensor1 data.
    Modify UCSI communication flow again, following Cypress's recommend.
    
Known issues:  
    None.
    
Note:  
    Must be used with after the BIOS QN0020/QX0020, or system will be dead loop reset!!!!!

=======================================================================================

EC Firmware Version : [24.28.00]
Build Date: 2019/09/11 14:35
CheckSum  : 0x227318C
Fixed bugs:
    Fix system into S4 state emergency power loss protection function trig probably issue.

Other Changes: 
    Modify UCSI communication flow again, following Cypress's recommend.
    The CPU blower duty will be approximately 62% for Sunon.
    
Known issues:  
    None.
    
Note:  
    Must be used with after the BIOS QN0020/QX0020, or system will be dead loop reset!!!!!

=======================================================================================

EC Firmware Version : [24.27.00]
Build Date: 2019/09/06 13:36
CheckSum  : 0x2273507
Fixed bugs:
    Fixed an issue after F7 BIOS update finished system can't auto power on.

Other Changes: 
    None.
    
Known issues:  
    None.
    
Note:  
    Must be used with after the BIOS QN0020/QX0020, or system will be dead loop reset!!!!!

=======================================================================================

EC Firmware Version : [24.26.00]
Build Date: 2019/09/04 17:23
CheckSum  : 0x2272E5F
Fixed bugs:
    None.

Other Changes: 
    Modify MMIO Remote_Thermal_Sensor1_Type to Internal_Ambient_Temperature.
    Fix DC_Input_Voltage data is zero issue.
    Support fanless mode for BIOS setup menu use.
    Support to disable FAN Off Capability behavior in BIOS setup menu.
    Fix same channel's other device effect the UCSI communication issue.
    Modify UCSI communication flow, following Cypress's recommend.
    
Known issues:  
    None.
    
Note:  
    Must be used with after the BIOS QN0020, or system will be dead loop reset!!!!!

=======================================================================================

EC Firmware Version : [24.25.00]
Build Date: 2019/08/28 16:44
CheckSum  : 0x2278EDE
Fixed bugs:
    None.

Other Changes: 
    Add emergency power loss protect function at S5 power state.
    Support new fan table(QN fan table_190826). 
    Combine PD FW v2.4.
    
Known issues:  
    None.
    
Note:  
    Must be used with after the BIOS QN0020.
    Must be used with after Fab B base board.

=======================================================================================

EC Firmware Version : [24.24.00]
Build Date: 2019/08/21 21:15
CheckSum  : 0x229644C
Fixed bugs:
    None.

Other Changes: 
    Add EC initialized BIOS recovery function.
    Add emergency power loss protect function at S0 power state.
    Support new fan table(QN fan table_190820). 
    
Known issues:  
    None.
    
Note:  
    Must be used with the BIOS QN0020.

=======================================================================================

EC Firmware Version : [24.23.00]
Build Date: 2019/08/14 20:35
CheckSum  : 0x22B010A
Fixed bugs:
    Fix Early Power On Sequencing function result in system can't shutdown issue.

Other Changes: 
    None.
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.22.00]
Build Date: 2019/08/07 19:23
CheckSum  : 0x22B6949
Fixed bugs:
    None.

Other Changes: 
    Support HDMI CEC BOX_OFF_by_TV power button toggle and sleep button toggle function.
    Support new fan table(QN fan table_190802).
    Support the part of EC_Register_Definition_v0.07 R/W function.
    The CPU blower duty will be approximately 56% for Sunon and 42% for the system fan.
    Support Early Power On Sequencing function.
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.21.00]
Build Date: 2019/07/26 10:39
CheckSum  : 0x22D69FB
Fixed bugs:
    Fix UCSI device yellow bang issue.
    Fix EC flash hang up issue.

Other Changes: 
    When system power state is S5 to S0, turn on all USB port power.
    The CPU blower duty will be approximately 58% for Sunon and 42% for the system fan.
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.20.00]
Build Date: 2019/07/24 20:23
CheckSum  : 0x22D6832
Fixed bugs:
    PD FW update will fail, if EC excute UCSI function.
    Fix issue with EC received wrong mailbox command probably.

Other Changes: 
    When EC FW update complete, waiting BIOS notify to do mirror code function.
    Add PCIE Bifuraction Configuration mailbox command.
    Enable independent power control function for every USB.
    Support the part of EC_Register_Definition_v0.07 read only function.
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.19.00]
Build Date: 2019/07/10 20:19
CheckSum  : 0x22F529E
Fixed bugs:
    None.

Other Changes: 
    When flash EC finished and do system shutdown, support auto power on system function.
    Support new fan control's algorithm(following QN fan table_190705).
    Add support deep sleep mode mailbox command.
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.18.00]
Build Date: 2019/07/03 20:39
CheckSum  : 0x22E7A4A
Fixed bugs:
    Avoid problems with USB power turned off probably.

Other Changes: 
    Disable independent power control function for every USB.
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.17.00]
Build Date: 2019/06/26 19:17
CheckSum  : 0x22F52CA
Fixed bugs:
    Fix UCSI function have no active issue.
    Fix PD FW update fail issue.

Other Changes: 
    Add Power Sense function(default is enable).
    Add independent power control function for every USB.
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.16.00]
Build Date: 2019/06/19 19:22
CheckSum  : 0x2334889
Fixed bugs:
    None.

Other Changes:
    Support System State Indicator function. 
    Enable EC flash fault tolerance mechanism.
    Add PD FW update function.
    Support SMLink1 to get PCH temp function.
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.15.00]
Build Date: 2019/05/24 18:40
CheckSum  : 0x1995696
Fixed bugs:
    When insert graphic card in system, system will occur reset dead loop issue.

Other Changes:
    Add fan control table mechanism.
    Modify VERSION ID and SKU ID setting.
    Disable EC flash fault tolerance mechanism.
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.14.00]
Build Date: 2019/05/15 18:45
CheckSum  : 0x1985C8B
Fixed bugs:
    None.

Other Changes:
    Return to use Virtual Wires S3/S4 signal to control power on sequence.
    Support deep S4/S5 with battery mode.
    Support EC power down function after system into S4/S5 10 Sec.
    Support EC flash fault tolerance mechanism.
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.13.00]
Build Date: 2019/04/24 20:13
CheckSum  : 0x19D68F9
Fixed bugs:
    None.

Other Changes:
    Support BIOS setup menu HDMI CEC relative items.
    Add enable/disable LAN device Mailbox command.
 
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.12.00]
Build Date: 2019/04/17 18:16
CheckSum  : 0x19DC1C9
Fixed bugs:
    Fix enable HDMI CEC function result in S3 resume shutdown issue.

Other Changes:
    Enable HDMI CEC function.
    Add some Mailbox command(Get VDDQ VoltageBRTC_DetectBGet VCCIO Voltage).
    Add get PSU fan speed function.
 
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.11.00]
Build Date: 2019/04/10 18:36
CheckSum  : 0x19F94D1
Fixed bugs:
    None.

Other Changes:
    Disable HDMI CEC function(avoid S3 resume shutdown issue).
    Add Mailbox command for Diag test.
 
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.10.00]
Build Date: 2019/04/03 18:41
CheckSum  : 0x1A01E31
Fixed bugs:
    None.

Other Changes:
    Support HDMI CEC function.
    Add Mailbox command for control WLAN power on/off.
 
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.09.00]
Build Date: 2019/03/27 16:48
CheckSum  : 0x1A32263
Fixed bugs:
    None.

Other Changes:
    Modify Psys power gain setting from 10 to 8.533.
    Add Mailbox command for Get CPU Logical Cores Number.
    Add Mailbox command to support XMP Enable/Disable adjust VDDQ voltage.
 
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.08.00]
Build Date: 2019/03/20 17:15
CheckSum  : 0x1A49CF0
Fixed bugs:
    Fix BIOS and EC UCSI interface communicate abnormal issue.

Other Changes:
    Modify PCIE config setting to 1 x8, 2 x4(ready to support PCIE auto config function).
    Support Deep S4/S5 functioon.
 
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.07.00]
Build Date: 2019/03/13 18:40
CheckSum  : 0x1A6AF8F
Fixed bugs:
    None.

Other Changes:
    Support UCSI interface communicate function.
 
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.06.00]
Build Date: 2019/03/06 16:53
CheckSum  : 0x1AA813B
Fixed bugs:
    Fix Won't power on after 5 sec Power Button override shutdown issue.
    Fix Won't power on after BIOS setup menu load default issue.

Other Changes:
    None.
 
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.05.00]
Build Date: 2019/02/20 18:17
CheckSum  : 0x1AD9CED
Fixed bugs:
    Fix won't power on after S5 shutdown issue.
    Fix system into sleep state can't resume issue.

Other Changes:
    1)Add sleep state POWER_MAIN_LED BLINK at 0.5Hz function.
 
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.04.00]
Build Date: 2019/02/13 18:46
CheckSum  : 0x1AA367C
Fixed bugs:
    Fix Won't power on after OS S5 shutdown issue.

Other Changes:
    1)Setting PCIE config to 2 x8 PCIE.
    2)Turn on WLAN power.
    3)Support ITE shell flash tool to flash EC.
    4)Modify STAND_BY_LED and EC_POWER_LED_MAIN behavior.
    5)Release PROCHOT signal.
 
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.03.00]
Build Date: 2019/01/18 08:18
CheckSum  : 0x1B0E021
Fixed bugs:
    None.

Other Changes:
    1)Modify ADP_ID detect function. 
    2)Update for FAB A SMT.   
 
Known issues:  
    None.
    
Note:  
    None.

=======================================================================================

EC Firmware Version : [24.02.00]
Build Date: 2019/01/14 17:53
CheckSum  : 0x1B0C942
Fixed bugs:
    None.

Other Changes:
    Release for FAB A SMT.
 
Known issues:  
    None.
    
Note:
    None.
