* EC version:[ARN28_V01.02] ==>[Date]20220916	
**************************************************************************
1. Fix Fn + Right Alt no function.

* EC version:[ARN28_V01.01] ==>[Date]20220902	
**************************************************************************
1. Fix fan led function error.
2. Update Power consumption control. 

* EC version:[ARN28_V01.00] ==>[Date]20220902	
**************************************************************************
1. Send 0x76 Q-event when power on.
2. Disable KB function when Lid close.

* EC version:[ARN28_V00.13] ==>[Date]20220826	
**************************************************************************
1. Fix right crtl function error.
2. Modify the PWM of keyboard backlight to 1kHZ.
3. Add Realtek_Smbus_SetSysPwrState to notify PD the system power state.
4. Send VendorCmdEnable to PD before set power state.
5. Fix fan led on at S5.

* EC version:[ARN28_V00.12] ==>[Date]20220811	
**************************************************************************
1. Modify EC_THROTTING to 100.
2. Update Power consumption control for request.
3. Modify TCC to 95.
4. Modify the PWM of keyboard backlight to 25kHZ.
5. Enable Hub function in advance when S3 come back.

* EC version:[ARN28_V00.11] ==>[Date]20220728	
**************************************************************************
1. Fix 4G issue.
2. Fix fan led can't turn on.
3. Change indicator light when no battery in.
4. Change some keys function.

* EC version:[ARN28_V00.10] ==>[Date]20220714	
**************************************************************************
1. Enable 45w/65w/100w adapter.
2. Enable fan silence mode function.
3. Enable wifi  function at S3.
4. Change 65w adapter inputcurrent to 3A.
5. Fix Frequency reduction when AC plugged.

* EC version:[ARN28_V00.09] ==>[Date]20220707	
**************************************************************************
1. Update fan control strategy.
2. Enable 65w/100w adapter.

* EC version:[ARN28_V00.08] ==>[Date]20220702	
**************************************************************************
1. Set S5_to_G3 for DC only mode when EC power off.
2. Set SUPPORT_FLASH_OFF_SEQUENCE to TRUE for DC only after flash EC will hang,need remove DC then can power on.
3. Change battery detection strategy.
4. Only enable charger Hybrid mode for AC+DC && RSOC > 15.
5. Set AF_V3P3A_EN_LO when EC power off in S5.
6. Change KB Backlight strategy.
7. Disable waking up from S3 by usb device.

* EC version:[ARN28_V00.07] ==>[Date]20220628	
**************************************************************************
1. Update fan table baseon Win3风扇最终版EG50060S2-C07C-S9A.pdf.
2. Fix Fn+Space function error.
3. Change battery detection strategy.

* EC version:[ARN28_V00.06] ==>[Date]20220617	
**************************************************************************
1. Fix ADC read error.
2. Use ADC3 for AC_DC case.
3. Revise OEM memory mapping.
4. Fix Fn+Space no function.
5. Fix power led can't breathe at S3.
6. Enable waking up from S3 by use device.

* EC version:[ARN28_V00.05] ==>[Date]20220617	
**************************************************************************
1. Add WIN MAX3 KB baseon WIN MAX3 MXTRIX _V6A11A_Membrane_20220119_X1  Z.dwg.
2. Change power sequence.
3. Fix power led can't turn off when entering S4/S5.

* EC version:[ARN28_V00.04] ==>[Date]20220614	
**************************************************************************
1. Update GPIO GCR setting for ESPI.
2. Add SPICLK_SEL for control EC mirror issue.
3. Update ITE IFU tool.
4. Change power sequence follow HW.

* EC version:[ARN28_V00.03] ==>[Date]20220610
**************************************************************************
1. Update  GPIO setting.
2. Base on ARN39 codebase.
