// Script File Name : Arena.txt
// Created on 04/05/24 at 12:34:0    
// iSetupCfg Utility. Ver 5.05.0004
// Copyright (c) 2022 AMI. All rights reserved.
HIICrc32= 6B379213

Setup Question	=     Package Power Limit 1 (Sustained)      [Watts]
Map String	= SPG081
Help String	= Intel Turbo Boost Technology will control processor power usage to the Sustained Mode Power Limit over a moving average time window: Sustained Mode Time (specified in seconds).
Token	=2B45	// Do NOT change this line
Offset	=EEE
Width	=01
BIOS Default=<15>
Value	=<15>

Setup Question	=     Package Power Limit 2 (Burst Mode)      [Watts]
Map String	= SPG082
Help String	= Intel Turbo Boost Technology will use this power limit for a very short duration.After that, the Sustained Mode Power Limit will be used.The recommended value is 1.3 x the Sustained Mode Power Limit.
Token	=2B46	// Do NOT change this line
Offset	=EEF
Width	=01
BIOS Default=<25>
Value	=<25>

Setup Question	=     Package Power Time Window (Tau)      [Seconds]
Map String	= SPG083
Help String	= Intel Turbo Boost Technology will control processor power usage to the Sustained Mode Power Limit over a moving average time window: Sustained Mode Time (specified in seconds).
Token	=2B47	// Do NOT change this line
Offset	=EF0
Width	=02
BIOS Default=[12C]3.00
Options	=[5780]224.00	// Move "*" to the desired Option
         [4B00]192.00
         [3E80]160.00
         [3200]128.00
         [2BC0]112.00
         [2580]96.00
         [1F40]80.00
         [1900]64.00
         [15E0]56.00
         [12C0]48.00
         [FA0]40.00
         [C80]32.00
         [AF0]28.00
         [960]24.00
         [7D0]20.00
         [640]16.00
         [578]14.00
         [4B0]12.00
         [3E8]10.00
         [320]8.00
         [2BC]7.00
         [258]6.00
         [1F4]5.00
         [190]4.00
         *[12C]3.00
         [C8]2.00
         [64]1.00

Setup Question	= iSetupCfg Password Check
Map String	= SCEPWD
Help String	= Configuring the BIOS via iSetupCfg tool normally requires Admin/Supervisor password for the access.
Token	=2B8C	// Do NOT change this line
Offset	=00
Width	=01
BIOS Default=[01]Bypass
Options	=[00]Enabled	// Move "*" to the desired Option
         *[01]Bypass
         [02]Temporarily Bypass

Setup Question	= After Power Failure
Map String	= SPG0BA
Help String	= Configures system behavior after AC power is lost.If set to Stay Off, the System will stay in a power-off state after AC power is restored.If set to Last State, the System will return to the last power state before AC power was lost.If set to Power On, the System will automatically power-on after AC power is restored.
Token	=2B91	// Do NOT change this line
Offset	=F0A
Width	=01
BIOS Default=[00]Power On
Options	=[01]Stay Off	// Move "*" to the desired Option
         [02]Last State
         *[00]Power On

Setup Question	= Network Boot
Map String	= SPG0DF
Help String	= Enables or Disables the ability to boot from the network. Note: UEFI network boot option is automatically disabled if Legacy Boot setting is enabled.
Token	=2B87	// Do NOT change this line
Offset	=F41
Width	=01
BIOS Default=[05]UEFI PXE
Options	=[00]Disabled	// Move "*" to the desired Option
         [04]UEFI PXE & iSCSI & HTTP boot
         [03]UEFI PXE & iSCSI
         *[05]UEFI PXE
         [06]HTTP boot